Serves to produce, display and print sisHYD reports.
- Report list – All usable
reports for the current project and the current calculation are displayed in a
tree view. If active calculation has current results, then when the window is
open, the 1st. report of the report list, the summary, is displayed.
Note: The lists of all
reports are in the site directory of the sisHYD installation in the file
settings.xml in the section ReportItems, the report definitions used in the
reports in the section ReportDefinitions.
Print – Opens the printing menu
of the report center. Enables the current report or the sisHYD standard report
to be printed. The following entries are available:
- Current view – Prints
the displayed lines of the current report
- Entire report – Prints
entire current report
- Standard report –
Prints the sisHYD standard report.
Navigation bar – Enables
navigation through larger data quantities of an overview report. The number of
rows displayed can be set on the right next to the navigation arrow. This
number is used also when printing as number of rows per page.
Max. – Change the maximum number
of entries for a currently displayed min/max report here.
Note: A maximum number
of result lines are preconfigured in the report list for min/max reports.
- Output – The option menu
lists all available output options for sisHYD. The following options can be
selected:
- XML ... – The contents
of the current report can be saved as an XML file.
- HTML ... – The contents
of the current report can be saved as an HTML file.
- CSV... – The contents
of the current report can be saved as a CSV file (ASCII file with semicolon as
separator).
- Excel – Transfers the
contents of the current report to a spreadsheet program (see
Output to
Excel).
- Standard report to
Excel – Transfers a standard report to a spreadsheet program (see Output to
Excel).
Note: The output of the result files
takes place in the report directory of the current calculation (subdirectory
Report2007\Calculation number under the current project folder). The file name
is made up of the report name and the time step number (at present always 1) as
well as the file ending of the selected output option (.xml/.htm/.csv).
- Selection – The selection
list selection contains all selection available in the current project. If in
this selection list a selection is selected, then the current report is only
executed on all objects contained in the selection. Thus, the report analysis
can be limited with large networks to a clearer quantity of data.
- Status bar – The name of
the calculation results as well as the calculation status, to which the report
refers, is displayed in the status bar.
